What We Do

Services

The full list of deck work covered, structural repairs included, not just the pretty stuff on top.

HomeServices

Everything we take on

Every job below is one we do ourselves across Long Beach.

Deck Installation

We frame new decks from the ledger board out, set posts on concrete footings sized for the load, and hang joists at 16 inches on center for standard decking or tighter spacing for composite. You pick the decking material and railing style, we handle the permit and the structural math.

Deck Repair

Soft spots, bouncy joists, and rot at the ledger board are the calls we get most. We pull the bad boards, sister or replace the framing underneath, and re-flash anywhere water's been getting behind the house.

Deck Staining & Sealing

Wood decking needs a fresh coat of stain and sealer every two to three years out here, sooner on a deck that gets full sun all afternoon. We pressure wash first, let it dry a couple days, sand any raised grain, then apply stain and sealer in the right weather window so it actually cures.

Custom Deck Design

Multi-level decks, built-in benches, stairs to a lower yard, we draw it around your house instead of a stock plan. We'll tell you upfront if something you want runs into a setback line or a height limit before you fall in love with it.

Composite Decking

Composite boards don't rot, splinter or need restaining, which is worth a lot near the ocean where wood ages fast. They do expand and contract with heat more than real wood, so we leave the gaps the manufacturer actually calls for instead of eyeballing it.

Deck Board Replacement & Resurfacing

Sometimes the frame underneath is solid and it's just the decking on top that's had it. We pull the old boards, check the joists while they're exposed, and lay new decking without touching the structure that's still good.

Deck Railing Installation & Repair

Loose posts and wobbly rails are usually a sign the attachment to the frame was never right in the first place. We rebuild railing to meet the 42 inch height and 4 inch baluster spacing code requirements, not just close enough.

Deck Framing & Structural Repair

This is the part nobody sees and the part that actually matters. We replace rusted joist hangers, rotted beams, and undersized posts, and we tie new framing back to the house the way current code wants it, especially for lateral load in an earthquake.

Deck Demolition & Removal

Old deck coming out to make way for something new, or just coming down because it's not safe anymore. We haul away the lumber and old concrete footings and leave the yard graded for whatever's next.

Pergolas & Covered Decks

A pergola or a solid roof over part of the deck changes how much you actually use it, especially through the hotter months. We frame it to carry the load it needs to, whether that's just shade cloth or a full roof.

How It Works

Four steps, and no surprises in any of them.

01

We come and look

You tell us what you want doing, we look at what is actually there, and we ask the awkward questions early.

02

You get a price

In writing, itemised, free. If something might add cost later we flag it now rather than at the end.

03

We do the work

Same crew throughout. We cover your floors, keep the dust down and tidy up before we leave each day.

04

We walk it with you

You point out anything you are not happy with and we fix it before the invoice, not after.

Where We Work

All of this, across Long Beach, CA

Deck installation and repair covers Long Beach and the cities within about 50 miles of it.

Long Beach, CA
Los Angeles, CA
Anaheim, CA
Santa Ana, CA
Irvine, CA
Huntington Beach, CA
Garden Grove, CA
Torrance, CA
Fullerton, CA
Costa Mesa, CA
Downey, CA
Common Questions

Things worth asking

Questions that come up once an actual deck project is underway.

Do I need a permit to build a deck?
Most decks over 30 inches above grade, or any deck attached to the house, need a building permit and inspection in Southern California. Permit filing and inspection scheduling is typically handled as part of the project rather than left to the homeowner.
How long does it take to build a deck?
A standard single-level deck usually takes one to two weeks from the first footing to the final board, depending on size and weather. Multi-level decks with stairs, built-in seating, or a roof structure can take three to four weeks.
Can you work within a specific budget?
Decking material choice is usually the biggest lever on price, and pressure-treated pine costs significantly less than composite or hardwood options. A range of material and railing options can be laid out at the estimate stage to match a target budget.
Do you offer any guarantee on deck work?
Workmanship on framing and installation is typically covered for a set period after completion, and decking materials carry their own manufacturer warranties, often 15 to 25 years for composite products. Warranty terms should be spelled out in writing before a project starts.
Who will I be dealing with during the project?
One point of contact handles scheduling, material questions, and any changes that come up during the build, rather than a rotating cast of subcontractors. Direct communication tends to catch small issues before they become expensive ones.
What decking materials do you work with?
Pressure-treated pine, cedar, redwood, and composite brands like Trex and TimberTech are all common choices for deck projects in this area. Each holds up differently to sun and salt air, and material tradeoffs get discussed before ordering anything.
Can I still use my yard while the deck is being built?
Most of the yard stays usable during construction, though the immediate work area needs to stay clear for safety and material staging. Access to doors near the deck may be limited for a day or two during demo and framing.
How should I prepare my yard before deck construction starts?
Clearing patio furniture, potted plants, and anything breakable away from the work area makes the first day faster. Sprinkler lines and irrigation near the footprint should be pointed out ahead of time so they don't get hit during digging.
What happens if you find rot or damage once the old deck comes off?
Hidden rot at the ledger board, rusted joist hangers, or undersized framing sometimes only shows up once the old decking is removed. Any additional repair needed gets flagged and priced before proceeding, rather than getting buried into the original quote.
How do I maintain a new deck once it's finished?
Wood decking needs restaining every two to three years and a yearly rinse to clear debris out of the board gaps. Composite decking mainly needs regular washing to keep mildew and pollen from building up, with no sanding or sealing required.

Not sure what you need?

Describe the problem and we will tell you what it probably is. No obligation.

Call (562) 580-4095